CSWIP 3.1: Part 3 – Welding Terminology and Definitions
We need to know these tern & define as below: 1) What is a Weld? A union between materials caused by heat, and or pressure Joint weld: Types of weld Preparation: Weld Zone Terminology: Butt Weld Features: Fillet Weld Features: 2) What is a Joint? – A configuration of members – Types of Joint type: – Types of Joint Preparation: 3) Welding Positions: Question: QU 1. Sketch a single-U butt joint and indicate the following a. Root face b.Root gap c.Included angle d. Root radius See above QU 2. Sketch a tee joint, fillet welded and indicate the following a. Leg length … Continue reading CSWIP 3.1: Part 3 – Welding Terminology and Definitions
CSWIP 3.1: Question with Answer and Explanation – Part 10
CSWIP 3.1 QUESTION AND ANSWER SERIES CSWIP 3.1: Question with Answer and Explanation – Part 1 CSWIP 3.1: Question with Answer and Explanation – Part 2 CSWIP 3.1: Question with Answer and Explanation – Part 3 CSWIP 3.1: Question with Answer and Explanation – Part 4 CSWIP 3.1: Question with Answer and Explanation – Part 5 CSWIP 3.1: Question with Answer and Explanation – Part 6 CSWIP 3.1: Question with Answer and Explanation – Part 7 CSWIP 3.1: Question with Answer and Explanation – Part 8 CSWIP 3.1: Question with Answer and Explanation – Part 9 CSWIP 3.1: Question with … Continue reading CSWIP 3.1: Question with Answer and Explanation – Part 10
Protected: HULL SURVEY – HYDROSTATIC AND WATERTIGHT TEST (Erection, fillet air test, chalk test, strength test of tanks, compartments)
There is no excerpt because this is a protected post. Continue reading Protected: HULL SURVEY – HYDROSTATIC AND WATERTIGHT TEST (Erection, fillet air test, chalk test, strength test of tanks, compartments)
CSWIP 3.1: Question with Answer and Explanation – Part 9
CSWIP 3.1 QUESTION AND ANSWER SERIES CSWIP 3.1: Question with Answer and Explanation – Part 1 CSWIP 3.1: Question with Answer and Explanation – Part 2 CSWIP 3.1: Question with Answer and Explanation – Part 3 CSWIP 3.1: Question with Answer and Explanation – Part 4 CSWIP 3.1: Question with Answer and Explanation – Part 5 CSWIP 3.1: Question with Answer and Explanation – Part 6 CSWIP 3.1: Question with Answer and Explanation – Part 7 CSWIP 3.1: Question with Answer and Explanation – Part 8 CSWIP 3.1: Question with Answer and Explanation – Part 9 CSWIP 3.1: Question with … Continue reading CSWIP 3.1: Question with Answer and Explanation – Part 9
Protected: HULL SURVEY – FINAL INSPECTION
There is no excerpt because this is a protected post. Continue reading Protected: HULL SURVEY – FINAL INSPECTION
COFFERDAM VS VOID SPACE
Visit: Shipbuilding Knowledge A-Z for more free topics on shipbuilding Check the passwords and visit: Protected: COFFERDAM VS VOID SPACE (full words) Continue reading COFFERDAM VS VOID SPACE
CSWIP 3.1: Question with Answer and Explanation – Part 8
CSWIP 3.1 QUESTION AND ANSWER SERIES CSWIP 3.1: Question with Answer and Explanation – Part 1 CSWIP 3.1: Question with Answer and Explanation – Part 2 CSWIP 3.1: Question with Answer and Explanation – Part 3 CSWIP 3.1: Question with Answer and Explanation – Part 4 CSWIP 3.1: Question with Answer and Explanation – Part 5 CSWIP 3.1: Question with Answer and Explanation – Part 6 CSWIP 3.1: Question with Answer and Explanation – Part 7 CSWIP 3.1: Question with Answer and Explanation – Part 8 CSWIP 3.1: Question with Answer and Explanation – Part 9 CSWIP 3.1: Question with … Continue reading CSWIP 3.1: Question with Answer and Explanation – Part 8
CSWIP 3.1: Question with Answer and Explanation – Part 7
CSWIP 3.1 QUESTION AND ANSWER SERIES CSWIP 3.1: Question with Answer and Explanation – Part 8 1) Which of the following would not be required to be checked before welding? a. The welding consumable b. The welder qualification c. Calibration of the welding equipment d. ( answer ) The workshop humidity Pls see below link: Typical Duties of a Welding Inspector 2) Is it permissible to allow a trainee welder to carry out production welding? a. ( answer ) Never b. Yes as long as the supervisor is happy with his workmanship standard c. Yes as long as he has the approved … Continue reading CSWIP 3.1: Question with Answer and Explanation – Part 7
CSWIP 3.1: Question with Answer and Explanation – Part 6
CSWIP 3.1 QUESTION AND ANSWER SERIES CSWIP 3.1: Question with Answer and Explanation – Part 1 CSWIP 3.1: Question with Answer and Explanation – Part 2 CSWIP 3.1: Question with Answer and Explanation – Part 3 CSWIP 3.1: Question with Answer and Explanation – Part 4 CSWIP 3.1: Question with Answer and Explanation – Part 5 CSWIP 3.1: Question with Answer and Explanation – Part 6 CSWIP 3.1: Question with Answer and Explanation – Part 7 CSWIP 3.1: Question with Answer and Explanation – Part 8 CSWIP 3.1: Question with Answer and Explanation – Part 9 CSWIP 3.1: Question with … Continue reading CSWIP 3.1: Question with Answer and Explanation – Part 6
AMARINE 